Avklaringer p? oblig 2

In the first part of oblig 2 oppgave 5, the components table lists two 4.7 kOhm resistors, but only one is needed. Please excuse us for the typo.

Some more clarifications regarding the same part:

• The LED should be wired in parallel with the potentiometer.
• The output pin of the potentiometer (the pin located opposite the other two pins) should be wired to ground; otherwise the resistance remains constant.
• You can vary the potentiometer resistance by attaching a knob with an arrow on top (included in the kit) to the potentiometer and turning it.
• Varying the resistance should turn the LED on and off.